hdparm-9.60:
	- support for ioSafe Solo with jMicron bridge, courtesy Matthias-Christian Ott.
hdparm-9.59:
	- decode more bits from id[69], courtesy Adrián Kálazi.
	- allow passing of custom LDFLAGS from the environment.
	- add new "static" target.
	- fix --dco-identify max sectors, courtesy of Paul Sultana.
	- get rid of leftover "unknown" variables from identify.c
	- fixed return values from get_log_page_data().
hdparm-9.58:
	- fix bug from 9.57 whereby -I for non-ATA might segfault.
hdparm-9.57:
	- added --set-sector-size flag to change logical sector size.
	- fixed handling of non-512 byte logical sectors in several places.
	- fixed possibility of infinite loop in sysfs_find_attr_file_path().
	- respect the "quiet" flag in a few more places.
	- skip "full device" checks for character devices (eg. /dev/sg*).
	- don't issue READ_LOG_EXT commands unless the drive claims to support them.
	- work around kernel/sysfs bug for "start" lba.
hdparm-9.56:
	- fixed byte order for --Istdout so that --Istdin can grok it
	- added --Iraw for raw binary output of IDENTIFY data to a file
hdparm-9.55:
	- added #include <sys/sysmacros.h> for major()/minor() macros
hdparm-9.54:
	- Partial revert of Jmicron changes, from Jan Friesse.
hdparm-9.53:
	- Read Drive Capacity fixes from Iestyn Walters.
	- SET MAX ADDRESS fixes from Tom Yan <tom.ty89@gmail.com>.
	- added --security-prompt-for-password to --security-help output.
	- fwdownload changes from Jihoon Lee.
hdparm-9.52:
	- Jmicron SATA-USB bridge support from Jan Friesse <jfriesse@gmail.com>.
hdparm-9.51:
	- add support for Jmicron USB-SATA bridges, courtesy Jan Friesse <jfriesse@gmail.com>.
hdparm-9.51:
	- New --security-prompt-for-password flag for use with the various --security- actions.
	- Makefile tweak from Mike Frysinger.
	- fix spelling/typos in man page and "removable", courtesy of Alex Mestiashvili.
	- fix spelling/typos in --sanitize-crypto-scramble, courtesy of Tom Yan.
	- fix NULL password handling in --security-unlock, courtesy of Tom Yan.
hdparm-9.50:
	- minor fixes for sanitize device stuff.
hdparm-9.49:
	- add ACS-3 overprovisioning support, courtesy of Intel.
	- fix bug in display of security section and use updated erase-time values from ACS-3, courtesy of Patrick Higgins.
	- increase timeout on fwdownload to 2 minutes, courtesy of Rusy Carruth.
	- fix bugs from devslp patch.
hdparm-9.48:
	- fix bugs from devslp patch.
hdparm-9.47:
	- added devslp patch (IDENTIFY word 76) from David Woodhouse.
	- help and manpage fixes from Michal Minar.
hdparm-9.46:
	- fix compilation with "musl libc".
	- added "hex:aabbcc.." for binary security passwords.
	- return EIO when read_big_block() fails
	- use llabs() rather than abs() in identify.c
hdparm-9.45:
	- fixed blocksize handling in fibmap code to use result from FIGETBSZ in more places (Anton Altaparmakov).
	- fixed divide by zero exception in geom.c
	- tidying up formatting in sgio.c
hdparm-9.44:
	- changed reg_flags struct to more closely match kernel definition (Lucas Magasweran).
	- added fwdownload mode "E" support (Rusty Carruth).
	- fix timeouts for security-erase (again!)
	- change display of security "supported" to handle ambiguous reporting from drives
	- don't rely upon C-library for byte-swapping
	- added --dco-setmax support, courtesy of Geoff Papilion.
hdparm-9.43
	- rearrange flag execution so that the idle/standby/sleep "now" flags are executed last.
hdparm-9.42
	- fix ordering of -S -y flags
	- spelling, typo, and formatting fixes for manpage and others
	- set block-count to 1 for Security commands sent via SAT (sgio)
	- use FIGETBSZ to determine filesystem block size for fibmap -- needed for FAT
	- fix master password revcode handling
	- try and fix reg_flags (again!) for old IDE taskfile ioctls
	- fixed '&&' bug in dco_identify code
	- force sector dumps (read-sector, identify, ..) to use le16 output format
hdparm-9.41
	- proper SCT identify info courtesy of Leonid Evdokimov <leon@darkk.net.ru>
	- updated raid1ext4trim.sh-1.5 script
hdparm-9.40
	- avoid HDIO_GETGEO_BIG when possible (doesn't exist in linux-2.6.xx and beyond)
	- pad secure erase timeouts by 30minutes rather than 5minutes.
hdparm-9.39
	- added -R flag to control Read-Write-Verify feature, courtesy of Gordan Bobic
	- nuked leftover sgio.c.orig file
hdparm-9.38
	- updated wiper.sh to allow all SCSI_DISK major numbers
	- updated handing for very long SECURITY-ERASE times
	- added -J flag for wdidle3 set/get
hdparm-9.37
	- handle raid1 start_lba values, and show -1 for indeterminte raid start_lba values
	- abort --fibmap when start_lba is indeterminate
	- updated wiper.sh to fix a kink with hfsplus filesystems
	- updated wiper.sh to no longer rely on the obsolete "rdev" command
hdparm-9.36
	- udpated raid1ext4trim.sh script to version 1.4
	- updated wiper.sh to support hfsplus and ntfs filesystem types, courtesy of Heiko Wegeler
	- updated wiper.sh with new flag to enable unattended operation, and handle SIGPIPE
	- updated manpage to indicate max sector range of 65335 for TRIM
hdparm-9.35
	- third go at fixing cdb issues, fixing -B flag.  Got it this time (finally).
hdparm-9.34
	- fix bad/missing cdb transfer length field for IDENTIFY and some other commands
hdparm-9.33
	- fix AHCI issues in sg16(): don't ask for sense_data on DATA-xfer commands
	- fix compiler warnings on old systems
	- fixed compilation on old systems lacking __be16
hdparm-9.32
	- fix b0rked (since 9.27?) SET_FEATURES commands; eg. -B, -M, etc..
hdparm-9.31
	- fix oflags bug in do_taskfile_cmd().
	- change --user-master to default to "user" instead of "master", for better drive compatibility.
	- use drive-supplied timeout (plus a little) for security-erase commands
	- use 15 secs as default general timeout (instead of 5)
	- ensure timeouts get passed through to sg16 correctly
	- increment revision-code when setting master-password, rather than always using 0xff11
	- update HPA description in manpage
hdparm-9.30
	- report word[105] in -I :  max 512-byte blocks of range-data per DSM/Trim command
	- fix wiper.sh/hdparm to use only as many LBA ranges per TRIM as the drive can handle
	- manpage / help-text cleanups from Benno Schulenberg <bensberg@justemail.net>
hdparm-9.29
	- add --offset for use with -t, to get timings from middle/end of drive,
	     courtesy of Sergei Kirjanov <rewlad@gmail.com>
	- restrict --trim-sector-ranges-stdin to small TRIM commands on most drives
	- fix w62 bug in -I
	- dump all data bytes with --verbose
	- warn about bad/missing sense data, but continue regardless
	- show in/out data[] separately with --verbose
	- Add reporting to -I for sata3 signaling speed.
	- force use of ATA_16 for all commands to ATAPI devices.
	- supply a sector count of "1" for IDENTIFY commands, to satisfy buggy USB3 bridges.
hdparm-9.28
	- check for EBADE for IDE/ATAPI compatibility with recent kernels
	- always issue both methods when setting DVD speed with -E
	- use /usr/sbin/rdev to find rootdev in wiper.sh
	- fix reporting of Sector-0 offset, from Martin Petersen
	- first crack at decoding the "WD Idle3" vendor-unique command (disabled by default)
hdparm-9.27
	- wiper.sh updated to wiper-2.3
	- fix definition of reg_flags in sgio.h to work with old IDE drivers again
hdparm-9.26
	- wiper.sh updated to wiper-2.2
	- zero-day bugfix for "hdparm -i" on model names with embedded blanks
	- bugfix for --security-erase-enhanced, courtesy of Cyril.Guyot@hitachigst.com
	- set _FILE_OFFSET_BITS in geom.c (still need to do this in hdparm.c someday)
	- added reporting for "Deterministic read ZEROs after TRIM" feature
hdparm-9.25
	- slightly tidier output from --trim-* commands
	- restrict --trim-sector-ranges-stdin to limit from /sys/block/sd?/queue/max_sectors_kb
	- updated wiper.sh to use --trim-sector-ranges-stdin rather than --trim-sector-ranges
hdparm-9.24
	- fixed malloc() bug in --trim-sector-ranges: it was allocating half the required size (oops).
hdparm-9.23
	- minor cosmetic changes in fibmap.c
	- added --trim-sector-ranges-stdin for wiper.sh-2.0
	- tightened up excess-args checking on a number of flags
	- added name to version line
hdparm-9.22
	- added fsync() call inside --fallocate
	- fixed fibmap.c to work around an observed ext4 bug with FIEMAP's "LAST" flag
	- added detailed comments to wiper.sh
	- more rework of wiper.sh, added xfs support, added generic online support
	- twiddled the code in geom.c slightly
	- cosmetic changes in fibmap.c and the manpage description of --fibmap
	- added kernel patch for compat_ioctl::fiemap support
hdparm-9.21
	- fixes and (big) speedups to wiper.sh (v1.2) script
hdparm-9.20
	- unified the online/offline wiper scripts into a single wiper.sh script
	- fixed bug whereby the wiper scripts generated command-lines too long for bash
	- fixed non-zero exit status from successful --trim-sector-ranges
	- reimplemented --trim-sector-ranges to use sg16() directly, with aligned data
	- allow wiper scripts to issue TRIM with up to 255 sectors of LBA-range data
	- added kernel patch file for sil24 protocol fix, needed for wiper/TRIM
	- cosmetic updates to the wiper scripts
	- fixed confirmation prompt text for --trim-sector-ranges
	- fixed manpage example for --trim-sector-ranges
	- removed some dead code (previously #if 0'd)
hdparm-9.19
	- fixed compile of fallocate.c on older systems
	- fixed man page description of --fallocate (parameters were reversed)
hdparm-9.18
	- fixed -E (set cd/dvd streaming speed)
	- updated man page for --fallocate, indicating ext4/xfs only
	- bumped max_sectors to 8000000 per TRIM in wiper scripts
	- s/awk/$GAWK/ in wiper.sh.online script
	- fixed Changelog for 9.17
hdparm-9.17
	- added wiper/ subdirectory with preliminary SSD-wiper (TRIM) scripts
	- nuked kernel_patches/ subdirectory
	- Capitalize first word of each line of help output
	- added ioctl(FIEMAP) support to --fibmap
	- added --fallocate flag
	- added --trim-sector-ranges flag
	- removed --trim-sectors flag
	- removed --fibmap-sector flag
	- first cut at wiper.sh script, to trim unused space on a non-rw ext[234] filesystem
	- embed VERSION string for easier digging out with strings(1)
hdparm-9.16
	- new protocol-specific forms of --fwdownload flags
	- added --trim-sectors flag
	- prevent segfaults when get_identify_data() fails
	- added full word69 features reporting for -I
	- added BuffSize=unknown to -i
hdparm-9.15
	- fix sgio.c LBA48 bugs on big-endian machines
	- fix -m to work with libata
	- added development snapshot of --erase-sectors (256) command (do not use)
	- added development snapshot of --format-track  (256) command (do not use)
hdparm-9.14
	- display DSM determinate/indeterminate TRIM support in -I output
	- tidy output of CFA features from -I
	- switch back to O_RDONLY for everything, to keep Debian/udevd happy
		http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=522091
	  Note that the kernel returns EFAULT rather than EPERM from SG_IO for
	  non-root users, and *no* SG_IO functions work for non-root users now.
hdparm-9.13
	- fix O_DIRECT (--direct) for arch's other than x86
	- strip leading/trailing spaces from -i model/fwrev/serno strings
hdparm-9.12
	- added logical/physical sector size reporting
	- updated -I output with SATA-2.6 additions
	- support APM level retrieval with -B flag
	- updated -C output to match ATA8
	- added "form factor" and "rotation" display to -I, courtesy of Martin K.Petersen.
hdparm-9.11
	- switch back to ATA_16 by default: required by libata for ATAPI devices
	- add --prefer-ata12 to force use of ATA_12 when needed (some USB enclosures)
hdparm-9.10
	- try and improve CF card detection
	- fix display of mwdma modes 3,4 for CF cards
hdparm-9.9
	- recalculate cyls when kernel returns a truncated value
hdparm-9.8
	- fix -N  to correctly use top 4 LBA bits on non-LBA48 drives
hdparm-9.7
	- FIX RATHER NASTY LBA48/LBA28 CONFUSION BUGS
	- use ATA_12 by default (helps USB), ATA_16 only when needed for LBA48
hdparm-9.6
	- fix -N for 1.5TB drives (from Justin Maggard)
hdparm-9.5
	- byteswap ID strings for fwdownload workarounds
	- Makefile fixes for $(STRIP) from Wolfram Sang
hdparm-9.4
	- nuked --fwdownload80 in favour of model-specific workarounds
	- use mlock() instead of MAP_POPULATE in fwdownload.c
	- issue SET_STREAMING command as part of -E (for newer CD/DVD drives)
		courtesy of Thomas Orgis <thomas@orgis.org>
		and Thomas Fritzsche" <tf@noto.de>.
hdparm-9.3
	- new --idle-immediate and --idle-unload commands
hdparm-9.2
	- fix WWN output from -I
hdparm-9.1
	- tidy up output from --dco-identify, add more info to manpage
	- add kernel (device driver) bug detection/warning to -N output
hdparm-9.0
	- update debian directory contents
	- add --dco-freeze, --dco-identify, --dco-restore flags
	- fix sgio.c to be more clever around the lba28 boundary
	- add supposedly obsolete "cache/buffer size" reporting to -I
	- new --fwdownload flag
	- fix error reporting from sg16().
	- dump entire returned sense desc[] in sgio.c with --verbose
hdparm-8.9
	- support /sys/block symlinks (some kernels seem to have those).
hdparm-8.8
	- fix -r, -a so that they display their values again (duh).
	- define BLKGETSIZE64 locally to avoid broken system headers that use u64 with it.
	- update man page to indicate that --security-* flags must be standalone
	- fix -Q to permit querying queue_depth (was broken in v8.7).
hdparm-8.7
	- fixes to permit building against older kernels which lack SG_IO
	- added build script for empeg systems
	- removed -R, -U flags: kernel support is broken and being removed
	- fixed IO_support output
	- prevent error messages from default flags
	- added sysfs.c, geom.c, fibmap.c
	- use sysfs for device start_lba/nsectors values whereever possible (for >= 2TB drives)
	- new standalone --fibmap and --fibmap-sector flags
	- converted -Q to access the queue_depth attribute from sysfs (now works for SATA!)
	- fixed readonly issue with optical drives that some people noticed
hdparm-8.6
	- add partition safeguards to r/w sector and make_bad_sector
hdparm-8.5
	- fix u8->u16 bug in security commands for all of 8.x series, Christian Franke
	- try and quiet errors from flush_buffer_cache()
hdparm-8.4
	- oops: v8.3 broke --write-sector.  Fix it again.
hdparm-8.3
	- fixed -i display for udma6
	- try and exit with errno on fail paths, from Ladislav Michnovic
hdparm-8.2
	- clear feat register for safety with SET_MAX_ADDRESS command
	- add note to manpage regarding possible -N transient failures
	- IDE_TASKFILE bug fixes and cleanups: works with old IDE driver now
	- fix misreporting of dma modes on some SATA-ATAPI bridged drives
hdparm-8.1
	- fixed -U parameter bug
	- added ATA8 minor revision info to -I, courtesy of chrfranke
	- added WorldWideNumber to -I, courtesy of Raksac
hdparm-8.0
	- added --make-bad-sector to deliberately create a media error
	- added --write-sector (aka. --repair-sector) to repair a media error
	- added --read-sector to test for a media error
	- Makefile dependency tweaks
	- added -N (get/set max address/HPA) flag, courtesy of Jakub Bogusz
	- fixed LBAsects output from -i to use LBA48 values when available
	- fixed alternate opcode for SLEEPNOW
	- lots of changes/fixes to sgio.c to support more commands
	- add detection of buggy Sandisk 16MB CF card
	- fixed tf_to_lba() bug, courtesy of Jakub Bogusz
hdparm-7.7
	- fixed bug whereby old data was shown after settings changed (eg. with -W0)
	- removed old notes about a "correction factor" from man page -tT descriptions
	- retry open with O_RDONLY if O_RDWR fails with errno==EROFS
hdparm-7.6
	- added -F flag to flush on-drive write cache buffer
	- replaced use of shm* functions with of mmap()/mlock()
	- removed gcc -Wextra flag --> unsupported on Debian Sarge
	- re-allow use of --security-freeze in combination with other flags
hdparm-7.5
	- beef up warnings for -s1 flag, as people seem to be ignoring them
hdparm-7.4
	- ignore ENOTTY response from DRIVE_CMD(NULL)
	- decode CFA advanced timing information
hdparm-7.3
	- fixed spelling of --drq-hsm-error in -h output
	- fixed SG_IO CDB[2] bits for better SAT compliance
	- fixed version number (v7.2 has "7.1" as version, doh!)
	- added #ifdef around use of BLKGETSIZE64
	- manpage updated
	- flush_cache before/after -W0 action
	- use O_RDWR instead of O_RDONLY for better SG_IO compatibility
hdparm-7.2
	- tweak -C
	- added more debug info from --verbose
	- added --drq-hsm-error to test libata EH (VERY DANGEROUS, do not use)
	- fixed breakage when used with old IDE driver
hdparm-7.1
	- big-endian fixes for -I, --Istdin, --Istdout
	- cody tidying in sgio.c
	- updated help/manpage for -v
	- marked -s1 as (DANGEROUS)
hdparm-7.0
	- new command-line parser
	- allow any chars (except 0x00) in security passwords
	- fixed -s manpage format error
	- updated -W manpage description
	- major internal rework in hdparm.c
	- added SET_FEATURES subcommand 0x07 to the -s0 sequence
	   (the kernel will eventually have to do this automatically)
	- fixed duplicate display of udma modes 3,4,5 with -i
	- added Timed-Command-Completion (TLC) data for -I
	- added support for SG_IO (SAT) ATA_16 command transport
	- ignore case for longargs (eg. --istdout or --Istdout)
	- remove dependencies on <linux/hdreg.h>
	- added query wcache (-W)
	- enhanced query acoustic (-M)
	- added kernel_patches directory with patches for ATAPI support
hdparm-6.9
	- added -s flag to control power-up in standby
	  (thanks to chrfranke)
	- make --Istdin more robust
	- added -I recognition of SMART Command Transport (SCT)
	   (thanks to chrfranke).
	- fix X2 over-reporting of -T results
	- add udma 3/4/5 modes to the -i results
hdparm-6.8
	- improve parsing/operation of --Istdin function
hdparm-6.7
	- don't default to "-v" when only new "--" longopts are used.
	- calculate integrity word if not correct
	- remove used code/parameter from identify()
	- fix "(null)" strings from the "Drive conforms to" line of -I
	- tidied up usage of prefix vars in Makefile
	- fix bug in -C implementation
	- new -H flag for (Hitachi) drive temperature
hdparm-6.6
	- fix build for Redhat/Fedora systems.
	- disable security commands when building on Redhat/Fedora,
	  as they lack the required data structures in the system headers.
hdparm-6.5
	- fix -I bugs from version 6.4.
hdparm-6.4
	- Makefile updates from Mikkel Krautz.
	- manpage updates / corrections.
	- fixed bug in -C code.
	- major updates to bring -I information up to current specs.
hdparm-6.3
	- added reporting of ATA revision numbers > 7
hdparm-6.2
	- eliminated short form (-F) of --security-freeze flag
	- completely revamped ATA Security Commands
	   (now they actually work sometimes)
	   courtesy of Leonard den Ottolander (a BIG thank-you!)
hdparm-6.1
	- fix BLKGETSIZE bug introduced in 6.0
	- man page clarification for -M (courtesy Stephen Gran)
hdparm-6.0
	- correct usage of BLKGETSIZE64 (returns bytes instead of sectors)
	- Added ATA Security switches (Benjamin Benz bbe[AT]heise[DOT]de)
hdparm-5.9
	- fix security-mode display (Franz Lehner)
	- fixed -W bug (Stephan Gran)
hdparm-5.8
	- added HDIO_SET_WCACHE support to -W
	- fixed double byteswap for big endian
	- fixed %lld warnings on 64-bit architectures
	- "hdparm -h" now goes to stdout instead of stderr
hdparm-5.7
	- fixed output of NULs in -I string fields
	- fixed big-endian -I crashes from 5.6
	- removed remains of defunct major-number checks
	- added support for BLKGETSIZE64 ioctl internally
	- added --direct flag to use O_DIRECT on device open
	- renamed -Istdin  to --Istdin
	- renamed -Istdout to --Istdout
	- allow other flags to follow any of: -I, --Istdin, --Istdout
hdparm-5.6
	- fixed reversed device names in idectl script
	- renamed readahead variables to avoid new glibc conflicts
	- added -Istdout flag to dump IDENTIFY data as hex
	- removed MAJOR number checks to open up hdpar for SATA-SCSI drivers
hdparm-5.5
	- added limited support for SCSI(-controlled) CDROM/optical drives
	- incorporated various -I clean-up patches from Maciej W. Rozycki
	- removed wordswap from capacity calculation: latest kenels already do it
	- fixed slight issues with ATA Revision display
	- added debian scripts from Stephan Gran
hdparm-5.4
	- fixed 2.5.67 compile error (LVM_BLK_MAJOR)
	- first attempt to support BIG_ENDIAN in identify.c
	- converted -T and -t to use minimum timing intervals (2 and 3 seconds)
	- fix device size overflow issue with -t
	- hdparm -I: fixed device size output for devices with reversed endian.
	- hdparm -i: added explanation for "*"
	- slight formatting change for -Tt outputs
	- fixed "(illegal value)" formatting
	- added CCISS_MAJOR
	- incorporated RedHat-8.0 and other patches
hdparm-5.3
	- get rid of malloc()
	- fix(?) BIG_ENDIAN problems
	- fix -tT to work on very small drives
	- fix -p output for parameters >= 100
hdparm-5.2
	- compile fixes for latest 2.5.xx kernels
	- moved -s from CFLAGS to LDFLAGS
	- fixed manpage formatting error from 5.1
	- -i was broken due to non-compatible changes in 2.5.xx
	- the fix for -i now breaks hdparm -i for really old kernels
hdparm-5.1
	- fixed segfault from -i on older drives
hdparm-5.0
	- updated -I to most recent ATA6 draft standard
	- added -Istdin to process input from /proc/ide/hd*/identify
	- CFLAGS Makefile fix from Kevin P. Fleming
	- -X mode names from Martin
	- tweaked #include's for Slackware
	- eliminate bogus "udma10" from -I output
	- formatting fixes for -I from various people
	- clean compile fixes from Steven Augart <steve@augart.com>
	- allow -d parameters other than 0/1 for special uses
	- removed busstate, acoustic, and nowerr from "-v" subset
	- support for Pacific Digital ADMA-100i
hdparm-4.9
	- fixed compile error with some kernels
hdparm-4.8
	- updated -Q to take queue depth as parameter value
hdparm-4.7
	- add -z option for BLKRRPART ("re-read partition table")
	- add -Q option to turn on/off tagged queuing
	- add -M option for acoustic feature set
	- allow ANY value for the parameter to '-p' (user beware!)
	- applied APM fixes from Gildas Bazin <gbazin@netcourrier.com>
hdparm-4.6
	- fix version numbers, update DMA notes in manpage
hdparm-4.5
	- ENDIAN tidyup, GETGEO fixes, Makefile fixes, mostly courtesy of Maciej W. Rozycki
hdparm-4.4
	- add -b option, courtesy of Tim Hockin
hdparm-4.3
	- display most fields as unsigned rather than signed values
hdparm-4.2
	- completely new format/implementation of "-I" with much more detail
	- code cleanups for newer libs/compilers
hdparm-4.1
	- merge some changes from Andre
	- code cleanups from Neil Macvicar and others
	- improved output from -i for newer features
	- incorporate RedHat-7.0 patches
hdparm-4.0
	- no such release
hdparm-3.9
	- added IDE_MAJOR[6-9]
	- nuked the LBAsects display (again!)
hdparm-3.8
	- fix display of drive capacity (Stephane Eranian <eranian@cello.hpl.hp.com>)
	- new -E "set cdrom speed" option (Matthias Oster <Matthias.Oster@eikon.tum.de>)
	- new -R and -U "(un)register hwif" options (Christian Lademann <cal@zls.de>)
	- new contrib subdirectory with contributed scripts from users.
	- support for display of newer PIO and DMA/UDMA modes
hdparm-3.7
	- use O_NONBLOCK for open(), to handle drives with media removed
	- make "HDIO_DRIVE_CMD failed" messages slightly more verbose
	- get rid of "HDIO_GET_MULTCOUNT failed" from -i on non-disks
hdparm-3.6
	- added new -V (version) option
	- removed confusing LBA "remapping" geometry calculation
	- small fix to "-I"
	- Courtesy of Andrzej Krzysztofowicz <ankry@green.mif.pg.gda.pl>:
		- added support for old XT drives
		- transfer display in kB/s rather than in MB/s for slow disks
		- fixed -v for SCSI disks
	- added -L to lock/unlock door of removeable harddisks
	- added udma modes 3,4,5..
	- updated Makefile to use "destdir" prefix -- Ytiddo <ytiddo@dicksonstreet.com>
hdparm-3.5
	- fixed compilation under older kernels
	- fixed udma mode info under older kernels
hdparm-3.4
	- added udma mode info
	- added support for SCSI_DISK_MAJOR{0-7}
	- fix -h (help) to show -y instead of -Y for "standby"
	- fix display of drive SerialNo: 20 chars instead of just 8
	- modify -C -y -Y to each try both possible command codes
	- add interpretations for use of -X to set UltraDMA modes
	- add -D for enable/disable drive defect-mgmt
hdparm-3.3
	- add -C, -y, and -Y flags for IDE power management
hdparm-3.2
	- force BLKFLSBUF after -T or -t  -- kmg@barco.com
	- fix minor -T/-t mixup in manpage -- hankedr@mail.auburn.edu
hdparm-3.1
	- permit "-p" with values larger than 5 (for cmd640 readahead)
	- updated version number on manpage (was way out of date!)
hdparm-3.0
	- always touch each sector in read_big_block() -- Jon Burgess
	- move cache timings to new -T option -- piercarl@sabi.demon.co.uk
hdparm-2.9:
	- updated author's email address
hdparm-2.8:
	- fixed compilation against older kernels
	- changed "KB" to "kB"
	- support for "-t" on "md" devices (from boris@xtalk.msk.su)
	- removed "Estimating raw driver speed" message from "-t"
	  because it is likely very incorrect on faster systems
	- added "-I" to re-issue IDENTIFY command to drive
hdparm-2.7:
	- fixed .lsm file
	- fixed "hdparm -c" (broken in 2.6) (kudos to clive@epos.demon.co.uk)
hdparm-2.6:
	- tidied up manpage
	- added support for HDIO_SET_PIO_MODE (kernel 1.3.61+)
	- reduced codesize by combining fprintf's in help
hdparm-2.5:
	- fixed -i display of eight character fwrev field
	- rearranged output of -v
hdparm-2.4:
	- added flag to turn on/off "using_dma" flag (kernel 1.3.22+)
	- added warnings about CMD-640B and RZ1000 bugs to manpage ("-u1")
	- cleaned up output from -c, added text interpretations
	- added -c functionality to -v
	- removed -a functionality from -v for scsi drives
	- added -n flag for ignoring the "write error" bit from a drive
	- moved binary from /usr/local/bin to /usr/local/sbin
	- added support for 3rd/4th IDE interfaces
hdparm-2.3:
	- added -c flag for controlling 32-bit chipset features with 1.2.9+
	- fixed error messages when -t used on SCSI drives
	- fixed date on man page to read 1995 rather than 1994 (late change)
hdparm-2.2:
	- fixed a memory problem in my PC, and now BLKFLSBUF seems safe again
	- fixed "help" line for "-v"
hdparm-2.1:
	- fixed formatting of DMA info line
	- added "(DANGEROUS)" to -u,-X,-W options in "hdparm -h"
	- changed order in which settings are applied:  placed standby last
hdparm-2.0:
	- added this file to the distribution
	- added -f and -q flags to hdparm.c and hdparm.8
	- added -N to gcc in makefile
	- changed installation paths to /usr/local/* in makefile
	- removed meaningless CPU% measures
	- removed -s and -x flags
	- added new -AKPSWXZ flags using new HDIO_DRIVE_CMD ioctl
	- removed BLKFLSBUF ioctl from everywhere except -t
	(there may be a kernel bug in the implementation of BLKFLSBUF
	 when used on an active (mounted rw) filesystem).
	- most features now require (E)IDE driver v2.6 or higher
	(ide-2.6.patch.65+.gz)
